My Car

(Supercharged E36 3.0 M3)

                        

                        

                       

 

(click on thumbnails to enlarge)

Before

                                                                                   

After

Supercharged, Lumma CLR Body Kit, 6 Speed gearbox conversion, Fully customised exhaust system (decatted), FSE Power Boost Valve, Kenlow Light Weight Fan, Walbro Fuel pump, 19"x8" alloys, 235/35/19 Michelin Pilot Sport 2  tyres, AP Racing 4 pot racing brake kit, Bilstein PSS9 Gas Coilovers, Pioneer AVIC DVD Sat Nav head unit, JL Sub/Amp, 6x9's, Hella Angel Eyes with HID, various interior chrome additions. Cobra Suzuka Kevlar Custom leather seats, Cobra harnesses, etc etc. 

(Full engine rebuild now done) (lower compression, Head porting, Block honing, Crank balanced, Custom pistons and rings,

more boost, lightened aluminium flywheel, Uprated Cerametallic clutch capable of handling 515lb ft torque). Running her in now. Will be going back to have a standalone MBE ECU and then from 12psi to 15psi then to 18psi "Can't Wait!!!"

 

MBE standalone engine management now fitted. Vanos now removed.

 

                                              

                                                      

                                                                                          

                                                 Rial Nogaro Wheels with AP 4pot Brakes                    Custom made Cobra Suzuka Seats

                                                                                                                       

Engine Build

                                                 

 

                                                                       

                                            Ceremetallic Clutch 515lbft                                         625cc injectors

Defi Gauges

                   

Stand alone Digital Lambda Sensor

                            Lightweight Pullies         Chromed Thermostat Housing         15psi and 18psi SC Pulley's

                                                                                                                                                                                 

New MBE Engine Management

                                 Vanos Removal (Work in progress)                Vanos removed (Done)

                                                                            

ITG High Flow Air-Filter

---------------------------------------------------------------------------------------------------------------------------------------------------

New ICE Build (16/6/06)

           

---------------------------------------------------------------------------------------------------------------------------------------------------

 

01/01/2007

Cars is away having a custom made Charge cooler developed. I will also be including a CO2 injector system to spray onto the pre-rad for even more cooling of the internal coolant. I have also decided to add a fuel cooler to get the temperatures down even more. You will see below progress of this.

The actual charge cooler is being situated into the Plenum Chamber. This is quite an engineering task but the guys have it all in hand.  Also being fitted is a new custom made Aluminium main radiator and a new Aluminium Oil Cooler..

 

                                   Charge Cooler Core         Pre- Red Core       Radiator and Oil cooler (WIP) 

                                                                                                                                                  

 

Cooling Fans

 

          

------------------------------------------------------------------------------------------------------------------------------------------------

01/01/2007

At the same time as I am am getting the Charge cooler made I have decided to go for a Cry02 cooling system, with Timer, Purge and Fuel Cooler. This basically emits an extremely cold spray of liquid CO2 onto the Charge Cooler Pre-rad. This makes the internal coolant even colder therefore cooling the intake air more.

                     

 

    CryO2 Kit                                        Purge System

 

                   

            Fuel Cooler Bar                      Pre-Rad Spray Ring

---------------------------------------------------------------------------------------------------------------------------------------------------

13/02/2007

Just received my custom made Leather Gear and Handbrake Gaiters. I purchased a half hide of the same white leather which my seat centres were custom made from. They look superb

 

---------------------------------------------------------------------------------------------------------------------------------------------------

14/02/2007

Custom made aluminium Header tank

 

---------------------------------------------------------------------------------------------------------------------------------------------------

15/02/2007

 

Charge cooler etc was progressing. It is coming together very nicely.

 

                                   

 

Control Panel for the Pre-Rad Fan, Charge Cooler Pump,  C02 Timer and Purge System.

 

 

18/02/2007

Loads of progress.

Should be picking it up very soon. She is looking tasty!!..

 

                                           

                              

                                                               Video (right click) "save target as"

---------------------------------------------------------------------------------------------------------------------------------------------------

20/02/2007

Got the car back to day she is looking really good. Next stage is to get her mapped up again.

Going back to be mapped on Wednesday the 28th